Vintage corner chisel. I cannot read the complete makers mark, it appears to MIX & C but I cannot read the initials in front of the MIX. You are buying as is. It needs cleaned and sharpened.

 

cdozer Store UP FOR BID IS A OLD TIME 6”BEMIS & CALL H&T CO. ADJUSTABLE MONKEY WRENCH. JAWS CLOSE TIGHT AND STRAIGHT, OPEN AND CLOSE EASY. NICE LITTLE WRENCH. FREE SHIPING. PLEASE SEE PHOTOS

 

An early L.S. Starrett No. 18A automatic center punch. Has all-steel handles and parts, the internal mechanism automatically strikes a blow when downward pressure is applied. Spring tension, which reg

 

Kelly Works Flint Edge Axe: 4&1/2lb.True Temper. Made in USA. No chips or cracks. 6&1/2" blade from poll to blade edge. 5&1/4" wide blade. Overall length is 790mm. (31") Older original Han

 

Vintage Dunlap Belt Driven Bench Grinder Buffer Buffing Whee Arbor Sanding Length of arbor shaft 18" size of bolt pattern 3-3/4" X 5-1/4" Comes with belt Fully functional

 

No. 5 Hand Plane marked Gambles Artisan, this plane could use a little attention, rusty in areas but is a good plane. The first block plane is marked Millers Falls no. 56 in decent condition. The othe

 

These were never used, but show a little shelf wear from sitting in the shop for a few years. An interesting way of gluing up solid panels. Per the Lee Valley web site they stop cupping and bowing of

 

Stanley No 50S combination plane Full set of sharp ready to use plough cutters Excellent condition See my other tools

 

lovely old STANLEY BAILEY smooth plane, No. 4, dated april 1910. this tool is missing the front knob but works with the bolt, shown in photos. this plane was working up until the rust came. See the cu

 

Welcome To GearSource! Bridge City Tool Works AMP6i Right Angle Attachment Made In Portland, Oregonwith Original Box From website:"This is an attachment to the AMP6i Angle Master Pro 6i. Please note t