Disston and Sons Hand Saw 26 inches With Nib circa 1898-1917 I believe this is a No. 16 saw but I can't see Etching to be sure. The etching on this saw is not readable not sure if you would be able to

 

Antique Cobbler's Hammer head in very nice condition

 

Offered is a VINTAGE ADVERTISING TAPE MEASURE from ","MINNESOTA LINSEED OIL PAINT CO.","Minneapolis, Minn.". Embossed advertising is on both sides. The steel housing is nickle plated and the 60 in. ta

 

This is for this pick and it has a chip on the end tip on one side as you can see.Size of this is approx. 18.2 cm L x 6.2 cm H x 3 cm thickest part.Please check pictures carefully as they make up a la

 

My father was in the time lock business. This set of 3 E. Howard & Co. Time locks are in working/ticking condition. They appear to be made of stainless steel and brass. They are approx 3 1/8 long,

 

Old school hand crank drill. It is made of metal. Fairly easy to crank. Email me with any questions and look at my other auctions to save and combine on shipping. Posted with eBay Mobile

 

Vintage Millers Falls 3" Belt Sander Model 830 6amp- this is in very good working condition left under a awning & sanding belt corroded but machine is still in great working condition looks like i

 

Vintage Beech and Brass Leatherworking Needle Awl Holder 4 Jaw Chuck Old Tool Click Images to Enlarge You are bidding on a nice vintage Beech and Brass Leatherworking 4 Jaw Chuck Awl Holder Tool in as

 

The item offered here is the micrometer holder. But, the micrometer shown, ground off on the back side of the frame, comes with it. The holder is cast iron with a 5/16in slot. The base is 2-3/4in diam

 

AMT Tap and Die handle in bag with directions. Looks as if never used but I listed it as used not knowing! In other words great condition.