Vintage and in very good condition !!!!. Up for bid is a vintage late 1800's domed nuts saw selection!!!. As follows: excellent 26" rip 5 1/2 TPI with steel plate on handle , amazing brass dome nuts,

 

This is for this carburetor meter as shown which has a metal outer casing and missing a lot of the black color on the front.This has all it's knobs, handle etc .This hasn't been tested as I have no id

 

up for auction is a mac tools 7 pice impact swivel socket set. 3/8 drive standard size- socket set has the following sizes--all are mac usa made sockets 3/8 7/16 1/2 9/16 5/8 11/16 3/4 all sockets are

 

Nice vise for a good price. Very handy to have in the garage, if you have any questions or concerns please message us and we will attempt to correct it.

 

Here are five awls. They range from 6' to 8'. One is marked, "Millers Falls Co. - Greenfield, Mass. Made in U.S.A. - No. 365" and another is "Craftsman - Made in U.S.A". The other are not marked. One

 

Japanese vintage chisel OIRE NOMI. Brand is KAMIKAZE. The chisel has been sharpened with #800 water sharpening stone. The blade width is 10mm. The length is 170mm. Weight 102g without wrapping. If you

 

Antique Stanley Planer. Has the marks of being a true antique, but could probably be cleaned up nicely. It is approx. 1 7/8" X 6 1/4". It says PAT DEC 28.86

 

Lot of (45) Tools - Pliers, Snips, Tape Measures, Nippers, Glass Cutters, Wire Strippers, Wire Cutters, Tile Crimpers, Needle Nose, Tubing Cutters, Saw & More Some of the Makers Include: Crescent,

 

An Old, Blacksmith Made, CANT HOOK with Pole Hardware attached. Total length is 12 inches. Note what looks like a crack in flat strip is where two pieces were joined and were not hammered out smoothly

 

Up for bid is an Antique Barn Peg Beam Hand Cranked Auger Drill Wood Handle 1.5" Diameter x 18.5" Long. Back in the day when you built a building there were no nails or they were very expensive, so co