VINTAGE STANLEY BLOCK PLANE, NO. 9 1/2. BLACK PAINT WITH BRASS WHEELS. MARKED "C" ON INSIDE OF BODY, JUST BEHIND BLADE OPENING. THIS IS A VERY CLEAN AND COMPLETE 9 1/2. ALTHOUGH THE PAINT IS CHIPPED O

 

2 Unusual Blacksmith Hammers. The one has rounding --1"--heads and a -4 3/4"- Head. The other has a --5"--Head -and --1"--Chisel ends--one vertical and one horizontal. Both handles approx.--13". Hamme

 

This is a vintage pickaroon in good condition with wood handle.The handle is very sound has some tape on very end a split but looks original to head perfect fit see pic no 6 It is 6 3/4" end to end an

 

Vintage Bonney 1/2" Drive Sockets Chrome-Vanadium CV-Circled Bonney startled the tool world by announcing a new kind of wrench "guaranteed to strip the thread or break the bolt without damage to the w

 

A beautiful, light joiner, Stanley/Bailey 6 plane, with finish baked on and heavy casting base. The base is rust and pit free and has been milled .005 flat on the bottom and sides. There are three pat

 

Old wood carving tools VINTAGE 7/16" #31 SPOON BIT WOOD CARVING GOUGE good cosmetic & functional condition with a recent edge Tool could pass for new old stock grade and condition is otherwise bas

 

I do not believe this has ever been used. Tool itself shows no wear. It is in the original package.

 

This auction is for this old brass & wood 11 5/8" angle finding tool came from machinist chest, as shown.  Good Luck Bidding.  I will be glad to combine items for you for actual shipping costs.

 

This bid is for a vintage saw filers or saw doctor cross and straight faced hammer marked 3 for the weight. No marker name. Solid 12" handle. the faces have a few edge chips which can easily be ground

 

SMALL BENCH VICE FOR JEWELLERS OR SILVERSMITHS ETC MADE WITH HAND RIVETS MEASURES 9 CM LONG. THE JAWS ARE 27mm LONG & 8 mm DEEP THE VICE CLAMPS NICELY BUT THE BENCH ATTACHMENT SCREW IS WORN SO IT