Flatter Hammer Head. You strike it with another hammer to flaten red hot metal.CAME FROM ESTATE AUCTION I took many pictures so that you would be able to judge condition for yourself (please see my ot

 

NEAT 2 Lb Repousse Hammer.. Here is a nice hammer to habe around any panel beating shop... One of the hammer's ends is slightly raised dome shaped, its in good condition with few dings from use, measu

 

BRAND NEW CRAFTSMAN FINE TOOTH RATCHET REPAIR/REBUILD KIT3/8 " DRIVE RHFT MODEL # 43781 43788 AND # 42794 (FLEX HEAD)FIX UP THAT FAVORITE AND POSSIBLY THE BEST RATCHET CRAFTSMAN HAS OFFERED ! ********

 

Sears Craftsman automotive timing light with orginal box. Timing light and box are in near-new condition.

 

Vintage boxwood and brass Button Maker's caliper rule No 1461. 3 inch rule marked with brass caliper slide in 1/40ths of an inch. The edge of the rule is marked J Rabone & Sons, so it predates the

 

mandyacoma Store YOU ARE BIDDING ON 5 18TH-19TH CENTURY KEYS..THE MEASUREMENTS RANGE FROM 3 3/4 INCHES IN LENGTH TO APPROX 5 1/2 INCHES NO RESERVE..THESE ARE EXTREMELY HARD TO FIND..THIS WAS PART OF A

 

NICE OLD SET OF K-D REVERSIBLE RATCHET BOX WRENCH SET WITH A DOUBLE SCREWDRIVER TIP, THAT FITS IN THE 3/16THS RATCHET. ONE BLACK CLOTH CARRYING CASE. SIZES: No.24(9/16), No. 23(1/2), No.22(7/16), No.2

 

I'm selling 14 miscellaneous Snap On tools pieces that I inherited from my grandfather. They need to be cleaned and have knicks, scratches and dents from usage. The part #'s for the pieces are.....B14

 

Antique 1/8" mortise chisel. Marked Charles Buck, Cast Steel. Has surface staining and pitting but very usable. Solid tight handle. Nice vintage tool for use or collection. Thanks for looking. USA shi

 

MORTISE [or PLOUGH] PLANE, early 1900s. Wood screws to adjust the wood guide, brass knobs, steel blade 1/4" wide. Measures 11.5" long x 10.5" wide x 7" tall. The blade is clean and sharp. I used it to