4 Mid Century Industrial Clip Boards~ Nice patina to the metal tops~ well used...some writing...some marks,...some tape....but no real damage...no chips or cracks...the clips all work well.... 3 are 1

 

You are looking at a vintage RESULTA 7 manual, adding machine that was made in West Germany. The machine comes with a green-handle stylus used to manipulate the numbers to record figures from 1 all th

 

      Old Wood Milliner's Hat Block Old wood which has gathered dust over the years.  But I have wiped it down with a soft cloth. Height is approximately is 7 inches Width is approx. 5-3/4 inches

 

this is a landers frery and clark 24lb scale it does work and scale adjust or zero nob functions well

 

Antique scale 8 1/2 inches tall records to 24 pounds The paint is peeling and there is surface rust Both decals are on the sides Front reads Simmons Hardware Co Inc "Sterling" St Louis USA Manufacture

 

Here is a real nice antique wooden hat mold. Includes the crown and brim. They show use and great patina. Crown size 7 1/4, the brim is 7 3/8 with 2 1/2 inch brim. Crown measures about 23 1/2 inches a

 

Here is a vintage wheel dresser made by KO LEE, Aberdeen, SD. The tool is about 6 1/4" long and the head is about 1 5/8" X 1 3/4". Aside from being well used there doesn't appear to be anything wrong

 

Vintage Farm Egg Scale Shows some peeling paint See all pictures shown ask any questions before bidding Thanks for looking!

 

Vintage Curio Cabinet Wood & Glass Display Case, Gilt Wood. Has extra piece of glass for a middle shelf. Has holes but I do not have the dowels to hold glass in place. Approx. 20" Tall & 9.5"

 

BE SURE & READ THE LOWER PARAGRAPH ABOUT THE COINLIKE WEIGHTS THIS SMALL SCALE HAS BEEN ON DISPLAY IN OUR HOME FOR MANY YEARS---IT SEEMS TO WORK WELL AND HAVE NOTHING BROKEN OR MISSING---IT SEEMS