Lot of Vintage Engraving Repousse Tools DESCRIPTION: Lot of 40 assorted unique vintage engraving tools. These antique tools were used by a Master Engraver between 1950 and the Millennium, prior to ret

 

Here is the finest FULL SIZE DISSTON D8 THUMBHOLE RIP HAND SAW, measures 28 1/8 inch blade long, 31 1/4" overall length, 2 7/8" high at the toe and 7" high at the heel. The skew back blade is very str

 

Grovelodgeuk Store Old Prory tinmans rivet set or snap it is 4 3/4 inches long with snap 1/8" rivets, the dome is 3/16" in diameter.

 

I'm listing two very nice Tyzack English Gents Dovetail saws together for one price, Used very little, no damaged teeth, Very nice saws to use. One has a small shrinkage separation near the upper port

 

Grovelodgeuk store Small open handle saw it has a total length of 18 inches with a 14 inch blade set a 6 points to the inch. It has the early style handle screws indicative of a 19th century saw. It i

 

Japanese vintage bench chisel. The brand is SHIGEMARU. The chisel has been sharpened with #800 water stone. The cutting edge is 42mm. The length is 178mm. The weight is 171g. I will combine the items

 

This plane un cleaned, is marked on one side Stanley, on the other side is No. 78 made in U.S.A., marked at the top of the single blade is Stanley, with their S.W. Sweet Hart logo, made in U.S.A., it

 

VINTAGE HAMMERS-STANLEY 24oz. BALL PEEN, VAUGHN 8oz. & SHORT HANDLED 6LB. SLEDGE: -STANLEY BALL PEEN 24oz. No.32B. -VAUGH BALL PEEN 8oz. No.TC308. -SHORT HANDLED 6LB. SLEDGE HAMMER (CANT MAKE OUT

 

Vintage Lixie P-H Pin Head Brass/Bronze Hammer Handle Punch w/ Wood Handle 1/4" across punch, 9/16" across hammer end, 2 1/4" head length - 9 7/8" length See photos, they are part of the description

 

1975 Roper Whitney Punch No. 5 JR. Rockford, Ill USA. Roper Whitney Punch set in metal box, with instructions, key and all parts. All punches included & sizes are: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4