Vintage Soldering - Blacksmith - Tinsmith - Furnace with Dual Burners Dual burner heat brick lined with cast iron base No markings to identify manufacturer No bolt on table but has bolts on front Appe

 

Good + Condition. The thoughtful restorer could do a lot worse than this. Surface rust. Almost all parts except bulbous hand part that retains blade, and, the blade itself. All the parts except the kn

 

Available is a 6512 Tool Box set with tray, smaller tool box and a wrench counter display. See photos for condition. Perfect for an entry level collector.

 

GREETINGS ONE AND ALL! I HUMBLY SUBMIT FOR YOUR PERUSAL A VINTAGE VAUGHAN & BUSHNELL V & B STRAIGHT LINE CARPENTER'S HATCHET AXE HEAD THAT WEIGHS IN AT 1 LB AND 3 OUNCES. IT MEASURES AROUND 3

 

Mrsdeadhorse Store here we have something you sure dont come across that often and that wopuld be an older Antique SCEW BOX that is still with its original matching TAP. These are the tools used to cu

 

Vgc

 

VTG.CHAPION KELLY WORKS AXE HEAD 3 3/4 LBS.7 3/8 LONG 4 5/8 ACROSS BLADE 3 1/4 ACROSS HEAD 1 1/4 THICK HEAD EYE IS 2 3/8 X 5/8 VERY NICE HAS SOME DINGS AND SURFACE PITTING CLEANED SHARPENED OILED 5.00

 

THIS 14 INCH HATCHET IS IN VERY GOOD CONDITION IT IS MARKED MADE IN GERMANY [THEY MADE GOOD TOOLS] THE CUT EDGE IS 3 1/4 INCHES BLUNT END TO CUT EDGE IS 5 1/4 INCHES GREAT CAMPING AXE OR MANY OTHER US

 

lizzie17 Store Disston Handle No.222 For 2 Man Saw

 

walrus store ITEM DETAILSUp for auction is a True Temper Kelly Works "DYNAMIC" double bit jersey axe head. 9" long with 4 1/4" cutting edges and weighs close to 3 1/2 lbs.. No cracks,splits, or repair